Installation Process

At Rhino Shield we take the preparation and installation of our coating systems very seriously and pride ourselves on the quality of our installation work compared to other coating contractors. We appreciate that our customers demand an installation that is completed on time, with no mistakes, and using professional applicators. Our only goal is to achieve the highest customer satisfaction on every job.

To ensure consistent success, only Rhino Shield applicators can install our system. Virtually all of our dealers are accredited by their local Better Business Bureau and carry an A or higher rating.

A typical Rhino Shield installation process is described below. However, each project is unique and deviations from these steps may occur depending upon the special requirements of the job.


Step 1 – Thorough Inspection

A Rhino Shield representative will walk the project area and inspect the space to be coated. We note any areas needing special attention including making an inventory of any wood that needs to be replaced, stucco needing repair, etc…A production plan is developed that includes the estimated time to complete the installation, amount of labor required and if any special equipment, such as a lift, is necessary to complete the project.
Watch Video


Step 2 – Cleaning and Washing

All jobs will start with a thorough cleaning which almost always includes a pressure wash. The installation team will take proper care to maintain the surface look and feel of your substrate. A clean and dry surface free of dust, oils and mildew spores, algae and surface chalking will insure optimal Rhino Shield adhesion.
Watch Video


Step 3 – Patching and Repair

Depending upon the extent of any wall damage, we repair or replace all damaged areas. This includes wood replacement and patching and stucco repair. Our goal is to bring the surface back to its original condition both for cosmetic as well as for coating installation reasons.
Watch Video


Step 4 – Scraping

On wood homes, all loose paint and debris must be removed. Easily removed paint may be sanded and scraped by the crew. Other forms of paint removal can involve chemical or mechanical stripping although, this is not necessary in all instances. Our goal is a bondable surface for both primer and ceramic finish coat.
Watch Video


Step 5 – Caulking

Caulking is an important aspect of any successful coating installation. Using a high quality elastomeric caulk, Rhino Shield crews caulk small surface cracks, vertical joints, and horizontal seams around doors and windows to reduce moisture intrusion. Old or split cracked caulk will be removed at this time. However, we typically do not caulk underneath laps as that may affect proper siding ventilation.
Watch Video


Step 6 – Masking

Areas not being coated may be masked off, covered, or temporarily removed by the installation crew. Typical areas to be removed include light fixtures, signs, downspouts, window shutters, and mailboxes. Special attention is given to cover areas such as roofing, landscaping, lawns, decks, and other areas prone to windborne spray.
Watch Video


Step 7 – Priming

The next step in the Rhino Shield installation process is priming. The primer is applied to seal, waterproof, and provide a bonding agent for the ceramic finish coat. When applied the primer sealer is white in color but may dry to a clear finish depending upon the Rhino Shield system utilized.
Watch Video


Step 8 – Finish Coat Application

Now the surface is finally ready for the ceramic finish coat. The finish coat is sprayed at a high mil thickness (100 square feet per gallon) to provide ultimate protection to your walls. Some areas (especially porous sections) may require brushing or back rolling of the ceramic finish coat. The ceramic coat can be tinted to over 1,500 colors.
Watch Video


Step 9 – Detail Touch-Up

After the finish coat has been applied, touch up of any highly detailed or tight space areas to make them look their best takes place.
Watch Video


Step 10 – Clean Up

The Rhino Shield installation team strives to leave each job site as it was upon arrival. All masking and coverings will be removed and any fixtures will be replaced and any leftover debris will be removed.
Watch Video


Step 11 – Final Inspection

Once the project is complete, you will review your Rhino Shield installation with the crew chief for final sign-off. Any remaining installation issues are identified at that time. Our work is not 100% complete until you are fully satisfied with your Rhino Shield application.
Watch Video